Linards Ticmanis <ticmanis@gmx.de> wrote:10K resistor. Everything works fine now, time to close the housing and be done with it.
Good!I only want to add that some 30 years ago I had an Apple connected to a TV and discovered that the color saturation was way too high. Not a big surprise: consider a 01010101... pattern. It is a 3.58 MHz square wave rail to rail. The first harmonic of that is about 63% of that - a lot more than the normal chroma signal. So I added a shallow notch filter - a low Q LC tank in series with the signal and it actually looked better. That's an LC tuned to 3.58 and shunted with a resistor. I definitely don't remember the values after all these years :) If the colors are oversaturated you may want to give it a try.
-Alex.