[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: PAL card: I think I've got it but...
- Subject: Re: PAL card: I think I've got it but...
- From: Linards Ticmanis <ticmanis@coli.uni-sb.de>
- Date: Sun, 17 Feb 2002 00:34:18 +0100
- Newsgroups: comp.sys.apple2
- Organization: University of Saarland, Computing Center, Germany.
- References: <3C6DDDA6.20503@coli.uni-sb.de>
- User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:0.9.8) Gecko/20020204
- Xref: archiver1.google.com comp.sys.apple2:17592
Ok, I solved this thing. Turned out all that was necessary was to solder
a pin to the card (the hole was already there) and run a wire from there
to the "wire wrap" video pin on the mainboard. Turning up the video
signal to maximum was enough to enable the video signal to drive a TTL
input, so I didn't need to hunt around for any special signals. Thanks
again to those people who helped me.
--
Linards Ticmanis
The Master said, "The business of laying on the colors follows the
preparation of the plain ground."