[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: setting up a brother m-1109
- Subject: Re: setting up a brother m-1109
- From: Joe Kohn <joko@NoMoreSpam.net.invalid>
- Date: 28 Jan 2002 10:56:09 -0600
- Newsgroups: comp.sys.apple2
- Organization: Newsfeeds.com http://www.newsfeeds.com 80,000+ UNCENSORED Newsgroups.
- References: <3c540467.1044579@gtech>
- Sender: Joe Kohn <joko@Oswego.FoxValley.net>
- Xref: archiver1.google.com comp.sys.apple2:16970
David. E. Goble <degoble@gtech> wrote:
> I have a Apple2gs and a brother m-1109. What do I need to connect
> these two?
Google really is a wonderful search engine. Within 2 seconds of entering
"m-1109" as a search term, the following appeared:
* M-1009 -
9 Pin, 80 column Dot Matrix. Epson FX-80 and IBM Pro-Printer
Emulations
That simple search shows it can use Epson drivers. As far as how to
connect it, there's only 2 possible choices...it either sports a parallel
or a serial interface. If parallel, you'll need a parallel interface
card; if serial, you'll need a cable.
Joe Kohn
http://users.foxvalley.net/~joko
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----