Re: HELP!! Needed /transwarp & IIGS??

[mjmahon@aol.com (Michael J. Mahon)]

Barry Allen wrote:

>In article <16865-3C46B5D3-132@storefull-225.iap.bryant.webtv.net>,
>MagicChiz@webtv.net (John Chism) wrote:
>
>> Hello,
>> 
>> Ok I got this IIGS, it is a 01 version.  it came setup with a transwarp
>> in it.  Eveything worked fine untill my battery for the clock and
>> control panel went dead.  I found a replacement battery and cut the old
>> one out & installed the new one.  
>> Now when I go in to my control panel it does not show the transwarp
>> menu's.  the light on the transwarp does come on when I turn on the
>> system.
>> Do I need to install something?  The instructions do not talk about any
>> software.    Any help would be great.
>
>I'd say yank the Transwarp and make sure the fingers (contacts) are clean
>on the card, replace and make sure the card seats firmly. The most likely
>problem is that the Control Panel needs to set to "YOUR CARD" whatever slot
>the Transwarp is in. With no battery, it changed back to the default
>setting of whatever slot the Transwarp is in and the GS doesn't see the
>card. 
>
>And there is no software, the control panel installs itself when you insert
>the card. Also make sure the CPU replacement chip is seated correctly as
>well.

Since the only thing that we know happened is that the battery went
dead, just set the control panel to "YOUR CARD".  The other options
should be taken only in the event that that doesn't do the job.

"If it ain't broke, don't fix it."

-michael

 Email:  mjmahon@aol.com
 Home page:  http://members.aol.com/MJMahon/