[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Serial text transfer of DOS not working....
- Subject: Re: Serial text transfer of DOS not working....
- From: John H Maxwell <maxwell@acsu.buffalo.edu>
- Date: Fri, 21 Dec 2001 09:43:31 -0500
- Newsgroups: comp.sys.apple2
- Organization: University at Buffalo
- References: <WtYP7.1883$FV5.768384@paloalto-snr1.gtei.net>
- Xref: archiver1.google.com comp.sys.apple2:15837
Jayson,
I have a DOS 3.3 floppy with ADT 1.21 (or is it now 1.22 - I forget) that
I can USPS mail to you, if you still have a need. Payment not required.
Take care, and happy holidays,
-John
sonick wrote:
> Greetings gang
>
> I am ready to pull my hair out. I am trying to do a DOS 3.3 Dump to my
> IIe via super serial card, to no avail. Before you dismiss this as user
> error, I would
> like to assure everything is setup properly from end to end. The end result
> is gibberish
> in hyperterminal or kermit upon 'IN#2', and then machine will not begin
> transfer of text
> file once i initiate it. Each different attempt nets different gibberish,
> but the machine absolutely
> refuses to accept the transfer.
>
> SSC settings:
> Terminal block set, Standard RS-232 cable
> DIP block 1: On, Off, Off, On, On, On, On
> DIP block 2: On, Off, On, On, Off, Off, Off
>
> Hyperterm & Kermit settings:
> 300bps, 8-N-1, No flow control, no line feeds, 40ms ASCII line delay
>
> So, I was wondering if anyone has any common pitfalls as to why this dos
> dump may
> be failing to initiate.
>
> If all else fails, I would paypal money this second to someone who could set
> me up
> with a DOS3.3 disk with ADT on it.
>
> ANY input appreciated.
>
> Regards,
> Jayson Anderson
--
----------------------------------------------------------------------
| John Maxwell | Disclaimer - |
| Equipment Repair Tech | "I know you believe you understand |
| SUNY at Buffalo | what you think I typed but, |
| B10 Lockwood Hall | I am not sure you realize that what |
| Buffalo, NY 14260 | you have read is not what I meant." |
|--------------------------------------------------------------------|
| V-Mail: (716) 645-3900 x116 |
| E-Mail: maxwell@acsu.buffalo.edu |
| W-Site: http://www.acsu.buffalo.edu/~maxwell |
----------------------------------------------------------------------