Re: An SPVHD success!

[powergs@macgui.com (Sam Latella)]

Great would love to see this!  As this could be my solution for mass storage
on my newly acquired but used //c.  Just have to figure what roms I have
inside the //c without opening it up.

I'm thinking of attaching a wireless audio and video transmitter to the //c
and a 55 inch led tv for game play.  Looks great on the big screen when it's
wired in, but I would rather have wireless solution.

However, having the SPVHD would be great too!

Sam

Steven Hirsch wrote:
> On 11/03/2011 06:12 PM, Sam Latella wrote:
>> Any pics?... would be interested on how it works on the //c!  And is it
>> forsale!
> 
> It works perfectly on the //c and IIgs.  Apparently the IIc+ is very
> uncommon 
> in France and Cedric has not had one to work with.  Hopefully we can debug
> by 
> proxy through me :-).
> 
> I'd love to provide pictures, but my Canon Elph developed what appears to
> be 
> electro-migration based rot (all too common in consumer products, 
> unfortunately).  Hopefully I'll have a working camera soonish and can get 
> photos out.
> 
> 
> 
>> Steven Hirsch wrote:
>>> All,
>>>
>>> According to Cedric, I have bragging rights for the first successful
>>> bringup
>>> of SPVHD outside his workshop :-).
>>>
>>> I received the bare board and a handful of parts last summer and finally
>>> found
>>> the time to build it into a little project box.  Once I sorted out that
>>> a
>>> DOS
>>> 3.3 image was a non-starter (no driver for Smartport), it worked first
>>> shot.
>>>
>>> So far, I've booted P8 on a IIgs Rev 1 and an original //c.  There
>>> appears
>>> to
>>> be an issue with IIc+ at this point, but Cedric is sending me a new
>>> firmware
>>> flash in an attempt to correct it - minor point at the moment.
>>>
>>> It is incredibly cool to have a modern storage option for the //c and I
>>> recommend this device highly!
>>>
>>> Steve
>>>
>