[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 8-bit Appleworks files

Subject: Re: 8-bit Appleworks files
From: fhahn@yahoo.com.invalid (Frank Hahn)
Date: Wed, 01 Aug 2001 00:10:05 -0000
Mail-copies-to: nobody
Newsgroups: comp.sys.apple2
Organization: Posted via Supernews, http://www.supernews.com
References: <3b66dc1c.7707079@bvnntp.nevol.mediaone.net> <20010731175609.29350.00002110@ng-cu1.aol.com>
Reply-to: fhahn@yahoo.com
User-agent: slrn/0.9.7.0 (SunOS)
Xref: archiver1.google.com comp.sys.apple2:11844

On 31 Jul 2001 21:56:09 GMT, A2MG <a2mg@aol.comNomail> wrote:
> Crossworks is good and eliminates the need for a Mac, but you need an Apple II
> machine and a cable to connect the Apple and PC.
>
I thought the conversion by CrossWorks was done on the PC side and not
the Apple II side?  It has been awhile since I have done this but I
think the Apple II is only used to read the files from the disk and
are sent as is to the PC side.

If the files are already on the PC, then an Apple II should not be
needed.  If the files are not, then you would just need to get them
transferred somehow.

-- 
Frank Hahn

Nothing is illegal if one hundred businessmen decide to do it.
		-- Andrew Young

References:
- 8-bit Appleworks files
  - From: gar@runbox.com (George Randall)
- Re: 8-bit Appleworks files
  - From: a2mg@aol.comNomail (A2MG)

Prev by Date: Question about RAM chips
Next by Date: Re: Question about RAM chips
Previous by thread: Re: 8-bit Appleworks files
Next by thread: Re: 8-bit Appleworks files
Index(es):
- Date
- Thread