Re: Help: Need a Better Telecom Proggy.

["william strutts" <wrstrutts1@home.com>]

Hmm. I can get ADT to transfer disk images at 19200
without any problems on a IIgs.

--
--
William R. Strutts - wrstrutts1@home.com - Whatever!

C'est moi!  http://www.facelink.com/wrstrutts

Just hacking away...
"Rubywand" <rubywand@swbell.net> wrote in message
3B467BCE.37A811A@swbell.net">news:3B467BCE.37A811A@swbell.net...
> 24 Carrot Balla writes ...
> >
> > As you see, I'm trying to get my system (Then one and only Apple
> > IIgs!!!)up with some really neat software, but I  think I'm using all
> > the wrong telecom programs.  First I tried the crappy program disks that
> > came with the 30 or so Super Serail Cards in my closet,  but those
> > aren't working wring.  I think they only like being used with the SSC,
> > and since I'm using my Modem Port (less headaches), I guess it might not
> > work.
> >
> > Then I fired up ADT, and transferred two programs very slowly over to my
> > Apple.  They were some Apple Access, adn Zlink. Both of these seem to be
> > choking when I'm sending files to them from my PC.
> >
> > Okay.  So do any of you have a idea for a no BS comm program that will
> > behave itself when getting files via the com ports, or am I going to
> > have to try to dig up my Mac Classic, or even worse the Mac IIsi to try
> > to get this thing going.  Yeah I really need to get that unshrinking
> > program on my apple.
>
>
>      The usual sequence of 'from scratch' improvements for a IIgs is ...
>
> o- Transfer DOS 3.3 using a NULL modem connection to 'type in' the dump
file
> at a low baud rate-- ref.
> http://www.apple2.org.za/gswv/a2zine/Sel/dos33dmp.htm .
>
> o- With DOS 3.3 running on the IIgs, transfer ADTgs (v.91) using the same
> method as above-- ref.
http://www.apple2.org.za/gswv/a2zine/gswv/ADTWin.html
> ; download ADTwin (ADTw122.zip) to get adt.exe for Windows to run on PC;
> download ADTgs91.zip and follow directions.
>
> o- On the IIgs under DOS 3.3, INIT several DD ("360k") diskettes to serve
as
> targets for transferred disk images from the PC.
>
> o- Download several utilities disks (.dsk file disk images) from Ground or
> GSWV-- ref. http://home.swbell.net/rubywand/Csa2FLUTILS.html#disks .
>
> o- Run ADT (ADTgs) on the IIgs and adt.exe (for Windows) on the PC. Set
baud
> rate to 9600 baud on both systems, and transfer the .dsk disk images to
> diskettes. This will get you ShrinkIt, one or two general purpose telecom
> programs, and several other good utilities.
>
>
>      Eventually, you will probably want to have Spectrum or Proterm going
(at
> around 38k baud or better) as your usual file transfer utility.
>
>
>
> Rubywand