Re: ADB keyboards and Control Key

["william strutts" <wrstrutts1@home.com>]

There was one that was T shaped with the ADB connectors
in the angled parts on the left and right similar to the
original IIgs keyboard but with a wider border.  The M0116
that I have is rectangular with no such cutouts and the
connectors are on the bottom of the keyboard on the
left and right.  Unless they redesigned the keyboard and
kept the model number the same, I can't say that they
are the same keyboard.  See diagram below.  The one
I have is similar to the one on the right not the left.
    _____________                  _______________
__|                         |__              |                            |
|                                  |             |
|
|_________________|   vs       |______________|


--
--
William R. Strutts - wrstrutts1@home.com - Whatever!

C'est moi!  http://www.facelink.com/wrstrutts

Just hacking away...
"Quadrajet1" <quadrajet1@aol.com> wrote in message
20010621115622.28793.00000148@ng-cn1.aol.com">news:20010621115622.28793.00000148@ng-cn1.aol.com...
> >I have seen at least three version that have the Control key
> >next to the A.  The original IIgs, the Apple Keyboard M0116,
> >and another version similar to the original IIgs with a wider
> >border.  The M0116 does not have the cutouts for the ADB
> >connectors on the left/right sides.  Its ADB connectors are under
> >the keyboard on the left and right.  Also the original Mac Plus
> >keyboard (non-ADB) had that configuration too.
>
>    The M0116 and the one you mention with the wider border then the IIgs,
are
> one and the same, from what I've seen.
>
> Raymond