[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Faulty Apple IIe

Subject: Re: Faulty Apple IIe
From: aiiadict@hotmail.com (Rich J.)
Date: 27 May 2001 09:24:54 -0700
Newsgroups: comp.sys.apple2
Organization: http://groups.google.com/
References: <3AEFAE75.52F2074A@usa.net> <9eq4r7$8p3$1@venus.itns.co.za>
Xref: archiver1.google.com comp.sys.apple2:8193

gregw@venus.itns.co.za (Greg Wildman) wrote in message news:<9eq4r7$8p3$1@venus.itns.co.za>...
> the RAMs are socketed you can replace them by levering them out and process of
> elimination. If the RAMs are soldered in DO NOT try and unsolder with a solder
> sucker!

I've replace the RAM in a few II computers.  Any with soldered chips I
clip all the chips out with nice cutters, heat the solder side and pull
the leads out one by one.  Solder in sockets, and replace the RAM.

Rich

Follow-Ups:
- Re: Faulty Apple IIe
  - From: Stephen Shaw <stephen@apple2.org.za>

References:
- Faulty Apple IIe
  - From: Jeff Thomas <a2forever@usa.net>
- Re: Faulty Apple IIe
  - From: gregw@venus.itns.co.za (Greg Wildman)

Prev by Date: Re: GSWV is back!
Next by Date: re: Installer issue -- Need a hand
Previous by thread: Re: Faulty Apple IIe
Next by thread: Re: Faulty Apple IIe
Index(es):
- Date
- Thread