[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MLTE : how to Extract from the TXNObject the text string

Subject: Re: MLTE : how to Extract from the TXNObject the text string
From: Rubywand <rubywand@swbell.net>
Date: Fri, 27 Apr 2001 14:23:30 -0500
Newsgroups: comp.sys.apple2.programmer, comp.sys.apple2, japan.comp.mac, fj.sys.mac.programming
Organization: SBC Internet Services
References: <B70B2CB1.18D4%shaylo1@yahoo.com>
Xref: newsfeed.google.com comp.sys.apple2.programmer:595 comp.sys.apple2:7512 japan.comp.mac:1009 fj.sys.mac.programming:60

shaylo1 writes ...
> 
> Hi,
> 
> 1) I'm using the MLTE => TXNObject .
>    I need to get the text out of the TXNObject , how can i do that ?
> 
> 2) How can one use the Edit Text Control with MLTE ?
> 
> thanks
> shaylo1


     Don't know. (This is an Apple II newsgroup.)  You may be able to
get the information you need from Apple at this (fairly long) URL:

http://www.devworld.apple.com/techpubs/macosx/Carbon/text/MultilingualTextEngine/Multilingual_Text_Engine/index.html


Rubywand

References:
- MLTE : how to Extract from the TXNObject the text string
  - From: shaylo1 <shaylo1@yahoo.com>

Prev by Date: Re: AppleLinc
Next by Date: Re: IIc accelerator
Previous by thread: MLTE : how to Extract from the TXNObject the text string
Next by thread: problem while transfering adt
Index(es):
- Date
- Thread