Re: problem while transfering adt

[Rubywand <rubywand@swbell.net>]

ldrolez wrote:
> 
> Hi !
> 
> I'm new to the A2 world, and I've succeeded to create a DOS3.3 disk
> with a serial transfer at 300 bauds. I have an A2e with 128k, 80 cols,
> and SSC.
> Now I want to transfer ADT, but it gets stuck after the line:
> 
> *: datas....
> 
> *: datas....
> 
> *:09 C9 88 D0 10 DE F1 11
> 
> No blinking cursor and, after that I need to reset the A2.
> Any other way to transfer adt ? with a basic program ?
> 
 ....

     You may be running into a snag related to control characters in the
adt.dmp file you are trying to send. One way around this is use Hyperterm to
do the send with the setup described in the FAQs at ...

http://home.swbell.net/rubywand/Csa2T1TCOM.html#020  .


     Another way is to send the later version of adt.dmp for version 1.22.
Like the DOS 3.3 dump file, it is free of the problem control characters. The
file is ADT122nudmp.zip. You can find it on Ground at ...

ftp://ground.ecn.uiowa.edu/apple2/Emulators/  .



Rubywand