Re: Transwarp GS/ Second Sight board interaction? --> Problem resolved!

["Deacon Blue" <scavenger@apexmail.com>]

Hi there!

I did a Deja-search and was able to find a working slot-assignment scheme
that enabled the co-use of the Transwarp GS and Second Sight board

The working asssignment know is

1.  Altech 340 MB Harddrive
2.  -
3.  Second  Sight board
4.  Transwarp GS
5.  SCC
6.  -
7. -

Using this layout the video-output is now OK in VGA as with normal
operation.

Thanks, and best regards



"Deacon Blue" <scavenger@apexmail.com> wrote in message
news:N1AU5.4938$5H3.136023@news1.oke.nextra.no...
> I refer to previos posting on NG regarding oscillator chip on a Transwarp
GS
> rev. 1.5 board.
>
> I've refitted the oscillator-chip into the socket with correct alignment.
> After power-up and inspection after entering in
> 'control-panel/ desk accessories' , the "Quick-Self Test" in "Transwarp
GS"
> menu reports 'passed' on all test rounds.
>
> Video board problem:
>
> --> I have also a Second-Sight VGA card installed in slot#1,  but after
> installing the TWGS-card the machine  hangs during boot of GS/OS 6.01.
> VGA-output is cyan with red vertical stripes, while the regular
> RGB&Composite output is normal.
>
> After removing the Second-Sight board, the machine boots normally.
>
> My working slot configuration
>
> 1.  -
> 2.  Harddrive Altech 340 MB
> 3.  Transwarp GS rev 1.5
> 4   -
> 5   SCC card
> 6   -
> 7   -
>
> Is there anything wrong with  the slot-configuration that  would affect
the
> correct operation of the 'Second Sight' VGA board?
>
> best regards
>
>
>
>
>