Re: Q: ADTv.091 for IIGS --> correct operation? / Alternative SSC card?

[Rubywand <rubywand@swbell.net>]

Deacon Blue writes ...
> 
> "Rubywand" <rubywand@swbell.net> wrote in message
> 
 ....

> I am a bit puzzled on this issue as the ADT 1.22
> runs perfectly with a IIC connected at 9600 bps.  When running from IIGS
> /ADT v.091 connected to the same PC and COM port setup, operation is
> currently not working as smooth, as reported in previous posting.
> 
> I have a SSC in slot#4 on the IIGS.  Do I need addtional cabling to make
> this work. Must this card be switched in any way to work? Feedback
> appreciated!
>

     Yikes! Did not think you would be using an SSC in a IIgs. ADT-GS is
intended for operation via the built-in IIgs modem serial port and firmware.

     If you want to use the SSC card, I'm pretty sure the way to go would be
ADT v1.22.




> --> ADT is truly a great piece of software, and deserve a 'Win32 port', now
> as Microsoft is moving away from the DOS-platform in the last Win
> ME-version.  I believe Mac already is supported by ADT.
> 
> best regards
> 
> DeaconBlue
> "There is life after DOS"

     True; but, there are piles of great DOS software.



Rubywand