[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Q: Swapping Motherboards on GS --> Damage hazard?

Subject: Re: Q: Swapping Motherboards on GS --> Damage hazard?
From: Marsha Jackson <menacechgo@aol.com>
Date: 2000/08/30
Newsgroups: comp.sys.apple2
Organization: jacksonfm@ync.net
References: <L%5r5.909$Yi4.19603@news1.online.no>
Reply-to: menacechgo@aol.com

(To sender&group)

The 7(actually 6) pin power connector and volktages are the same so that part
presents no problem, the problem is the US based motherboards I put out NTSC
composite video instead of PAL.
I don't have my hardware reference handy, so I'm not sure if this would really
affect the 15pin RGB output or not.

Deacon Blue wrote:

> I am planning on swapping a ROM03 motherboard from a US-style 110V powered
> IIGS  into a European 220V powered IIGS-case which originally had a ROM01
> board from before.
>
> Would this be straightforward do-it-yourself procedure without potential
> hazard for making damage?

Follow-Ups:
- Re: Q: Swapping Motherboards on GS --> Damage hazard?
  - From: "Roger Johnstone" <rojaws@es.co.nz>

References:
- Q: Swapping Motherboards on GS --> Damage hazard?
  - From: "Deacon Blue" <scavenger@apexmail.com>

Prev by Date: Re: "Hard-coding" a text file
Next by Date: Re: "Hard-coding" a text file
Previous by thread: Re: Q: Swapping Motherboards on GS --> Damage hazard?
Next by thread: Re: Q: Swapping Motherboards on GS --> Damage hazard?
Index(es):
- Date
- Thread