I acquired a non functioning IIe power supply with some stuff. On
opening it up I found two diodes that were swollen and split. I used
parts from a clone power supply that had every cap leaking as
replacements.
I have no knowledge of the history of this power supply and I�m
wondering if something on the outside might have drawn too much power
or is it something on the inside that may cause it to fry those parts
again.
While I was looking at power supplies I decided to pop the cover off
an old Apple power supply I happened to find inside a clone. Found the
Apple logo on the circuitboard and all the parts are dated 1978.