Re: Q: Ram expansion card for IIGS - 4MB

[quadrajet1@aol.com (Quadrajet1)]

>Hi there!
>
>I'm running a ROM 01  machine with  GS/ OS Sys 6.0.1 from a Focus 340MB
>Harddrive, no accelerator board.
>
>I have a RAM expansion card  with onboard 2 MB  in form of PC-style I MB
>SIMM-boards, two sockets are emptly opening a possibility for 4 x 1 MB
>Simm,s
>
>The board has a switch possibly for enabling/disabling the banks  marked
>1,2.
>
>I suppose as with PC's the SIMM's must be installed in pairs.  I have some
>older SIMM's earlier used in PC's,  2 x 4 MB, 2 x 8 MB is it possible to
>utilise these on the GS RAM expansion board?
>
>The board itself is smaller than the regular Apple 512 KB Expansion, but
>has no specifications printed onboard
>
>Appreciate feedback on this issue!
>
>best regards

   I am not quite sure what you mean by 2 x 8 and 2 x 4 SIMMs (unless you mean
72 pin...).  I have over 165 pounds (no kidding, 8000 or more..) of 1 Meg
SIMMs.  If you want a set of four 1 Meg SIMMs, I'll send them to you for the
cost of shipping, like $1 or so. I'll even put them in the SIMM tester too.  I
am not sure Apple made a 512K expansion card.  A 1 Meg card, yes.

Raymond