[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Q: Video-7 enhancer for Apple IIC.
- Subject: Re: Q: Video-7 enhancer for Apple IIC.
- From: Tony Cianfaglione <ab616@chebucto.ns.ca>
- Date: 2000/06/20
- Newsgroups: comp.sys.apple2
- Organization: ISINet, Nova Scotia
- References: <ML935.4088$eI.68384@news1.online.no>
I have the same setup and have no problems such as this.
------------------------
On Sun, 18 Jun 2000, Deacon Blue wrote:
> I'm running a IIC micro with a Video-7 enhancer connected to a Commodore
> 1084 digital (TTL) RGB monitor using the DB9F output.
>
> The combination works OK giving a sharp and well-defined colour output. One
> phenomena that seems to be link to this arrangement is that when I try to
> boot a new disk, (either by cold-boot or by software reset) whith the
> monitor turned on, the boot process won't work, giving "check disk-drive"
> message.
>
> However, booting the disk first with monitor turned off, and then turning
> on the monitor again midway through the initial boot seems to resolve this
> condition.
>
> Is this a "normal occurence" for this setup, or is this linked to the use of
> a digital CBM monitor?
>
> Any feedback appreciated!
>
> best regards
>
>
>
>
>
>