Re: ImageWriter LQ problem

[gospodin@clubi.ie (Vincent Quinn)]

In article <8icfpk$2of$1@nnrp1.deja.com>,
ladyphoenixxii@my-deja.com wrote:

>Do you have a manual?  Make sure you have the paper feeding in and the platen
>set up correctly. Pushing, pulling coming in from top or bottom requires a
>different setup.  I prefer to do the self test with a single sheet of paper,
>without the cut sheet feeder.  Have the paper feed lever back for friction
>feed. The paper thickness lever to 1.  I discovered that paper matters so use
>a 20 pound bond for the self-test.  If the self test doesn't work I don't
>think your computer is going to make a difference.  The manual mentions a
>Hyperstack that has more trouble shooting information.	My manual says if the
>self test is failed take the printer to the Apple Dealer.  Good luck.  Sandy

Nope, don't have a manual, but I _believe_ everything is set up right: I
suspect a hardware problem (EPROM gone bad?). Anyway, I'll hunt for the
HyperCard stack.

Vincent Q