Self-diag shows RAM problem!

["Theusch Family" <theusch@centurytel.net>]

I got an Apple//e for free, the school was giving them away.  Bought a
power cord, turned on, used Applesoft BASIC (in ROM), everything was
fine.  Then, I added a Unidisk to the I/O card in slot 6.  The disk spinned
and read part of a disk before showing a garbled error messege with a
* prompt.  I knew it wasn't the disk drive's fault.  All bootable disks gave
a similar result.  I ran the self-diag thing with solid-apple control-reset.
Colors flashed for a moment, and a messege came up, centered:


         RAM       0  0  0  0  0  0  1  0


What can I do to fix this problem?  The RAM IC's are soldered in ...

I just want to be able to save my programs on disk.  Using tape is unstable
and difficult.

JeffT
larva_jt1@yahoo.com
------------------------------

Have "basics" for Apple //e on 5.25" disks?
DOS 3.3   ProDOS   CopyDisk etc.
I will pay materials and shipping for copies...