Re: Xebec Card Help

[Wayne Stewart <waynes@intergate.bc.ca>]

That's the same version as most of the cards I have here. Some of my
serial # are lower and some higher. That should be a 1988 production
card. My oldest is 1985 with the pin shiped. It looks like the pins were
cut off with a pair of snips. The holes were plugged with a white plasic
peg.

"Brian A. Davis" wrote:

>
> My card may be an earlier version. The pin has definitly been broken off.
> There is still a piece sticking out of the connector on the board. The
> hole has not been plugged.
>
> My card is marked ASSY 103916-04 Rev. H-04 S/N 11-0004.