[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ADT Transfer: Verifying serial connection

Subject: Re: ADT Transfer: Verifying serial connection
From: Phoenyx <quazar@dcnet2000.com>
Date: 2000/03/25
Newsgroups: comp.sys.apple2
Organization: Insync Internet Services, Inc.
References: <38B641A7.F10C7432@hotmail.com> <20000325021431.28304.00002142@ng-bk1.aol.com>

Well, this does not apply to every 2c printer cable does it. I've
used a 2c for quite a while and have seen several different 2c
printer cables.

Is this the same for the GS printer cable?

-- 

Cheers and best wishes,
Phoenyx

Have you fed your Apple today?

Phoenyx's Pages are back online...

It seems the ZIP.TO link was down for a while.
It is now working again. This is the preferred
link to my site. You may also use the direct link.

http://zip.to/Phoenyx_A2
http://www.tinyangeldesigns.com/Apple2

Follow-Ups:
- Re: ADT Transfer: Verifying serial connection
  - From: "St�phane BAUDOT" <stephane.baudot@fnac.net>

References:
- Re: ADT Transfer: Verifying serial connection
  - From: Vince Randall <clint31@hotmail.com>
- Re: ADT Transfer: Verifying serial connection
  - From: mjmahon@aol.com (Michael J. Mahon)

Prev by Date: Re: ADT
Next by Date: Re: Accessing floppies on II emulator
Previous by thread: Re: ADT Transfer: Verifying serial connection
Next by thread: Re: ADT Transfer: Verifying serial connection
Index(es):
- Date
- Thread