Re: Apple Rev.C SCSI Jumpers

[Stingray <stingray@webzone.net>]

Stingray wrote:

> David Empson wrote:
>
> >
> >
> > Nope.  There is at least one digit too many in the address on the first
> > line (it should be six digits, not seven).  There is also only one
> > equals symbol after the "X" in the second line, and a space between the
> > "BRK" and "00" on the first line.  The rest might be correct.
> >
>
> OK here is acuurately:
>
> 00/017D: 00 00                  BRK 00
>  A=FF00 X=00C9 Y=0000 S=0171 D=0000 P=B0 K=00 M=0C Q=A8 L=1 m=1 x=1 e=1
>
> I know I got it right this time, I set my GS right next to my Mac and copied it
> directly, instead of stupidly jotting it down on a piece of paper and walking over
> to the Mac to type it out. I double & triple checked it.
>
> The big error was I misinterpereted my own handwriting and got a one instead of
> the first slash and a zero instead of the first D. The Y=0000 I wrote down as
> Y=0010, could this have changed? More likely another mistake on my part. I don't
> know if it matters, but the B in BRK 00 should be directly over the S in S=0171. I
> don't know if it will stay that way in transit.
>
> I'm anxiously awaiting your interpretation of this, David.

Please no jokes about my misspelling the word accurately in my last post :-)

With the card installed in a Rom 01 (previous was a Rom 3) I get:

00/0100: BA                      TSX
 A=FFB0 X=00FF Y=0010 S=0102 D=0000 P=B0 B=00 K=00 M=0C Q=88 L=1 m=1 x=1 e=1

 Card in slot 2.

David?

Steve

{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}
:
:      In a world without walls or fences,
:      Who needs Windows or Gates?
:
:          * stingray@webzone.net *
:
{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}{`}