Re: Laser 128 video adaptor

[supertimer@aol.com (Supertimer)]

noone@nowhere.org (Bart) wrote:

>I have a little box that has a RCA jack on one end, and a RGB like connector 
>on the other, and says Laser on the side.  I got it in a box of junk that 
>included 2 Laser 128s (one was an EX), + some clone external drives in cluding

>1 Laser 5.25.  I have yet to try using the gadget but was curious if anyone 
>else had seen one of these.....

It is an RF Modulator.  This is to get the Laser's video onto an
older TV set that does not have Video inputs.  It changes the
Video signal of the Laser into a Radio Frequency (RF)
Channel 3 signal.  You connect this to the antenna input of
an older TV and set the TV to channel 3 to use the Laser.

The RF Modulator is irrelevant for all modern TV sets AND
older TV sets if you have a VCR between the set and the
Laser.