Re: SmartportVHD/USB compatibility test report

[Cédric PELTIER <pcedric@hotmail.com>]

Ok :)

I listed all requests until today on comp.sys.apple2, and I will contact 
each of you individually, when details will be finalized.

I planed a small batch of ten boards by the end of may 2011, but more 
boards are requested, wich is good for saving some bucks :)

For more requests, please contact me directly with 'Smartport' as 
subject, and I will add you on the requester list.

Cedric.

Le 23/04/2011 12:57, C�dric PELTIER a �crit :
> Hi all !
>
> Good news, the SmartportVHD/USB successfully passed compatibility tests
> on the following hardware combinations:
>
> Computer: Apple //c ROM 3.5
> Operating system: Prodos 8
> Devices combinations:
> + SpVHD
> + SpVHD + Disk //c
> + SpVHD + Unidisk 3.5
> + SpVHD + Unidisk 3.5 + Disk //c (could exceed the Apple 2c power specs)
> + Unidisk 3.5 + SpVHD + Disk //c (could exceed the Apple 2c power specs)
>
> Computer: Apple IIgs ROM 03, with and without IIgs MicroDrive
> Operating system: Prodos 8, GS/OS 6 without additional driver
> Devices combinations:
> + SpVHD
> + SpVHD + Unidisk 5.25
> + Apple 3.5 + SpVHD
>
> Others combinations are not tested yet, but should work as well until
> smartport's rules are followed (wich raise some practical issues
> concerning the boot device if the board is hosted within a floppy drive)
> Apple IIe/Liron and Apple //c+ are not tested.
>
> The full presentation of the project will be done during upcoming weeks,
> including final cost.
> Cedric.