Re: Apple IIe power supply help

[Rubywand <rubywand@swbell.net>]

Erik writes ...
> 
> Trying to help a friend out with an old Apple IIe (built 1983) that has
> quite working, have isolated it to the power supply, power into the supply,
> power at both sides of the switch and the fuse is good, but no power out.

     There is some info on power supply repair at
file:///C|/HTMLstuff/bink/Csa2POWER.html .

 
> I would assume finding another power supply is a lost cause so we are left
> with repairing this one, but have no schematic for the power supply board.
 ....

     The Apple ][ Reference Manual-- the one supplied with the II+-- includes a
power supply diagram which should match yours very closely. Really, though,
your best bet is to check a current catalog from Jameco, Marlin P. Jones, or
MECI. You can find a low cost surplus power supply that will fit without too
much trouble and, probably, do a better job of running your IIe than a standard
A2 replacement.


Jameco (800-831-4242; http://www.jameco.com ) Apple II and general parts 
supplier 

MECI (800-344-6324; http://www.meci.com ) surplus electronic parts- fans, 
tubes, solenoids, IC sockets, 50-25 SCSI cables and adaptors, ... 

MPJA/ Marlin P. Jones (800-652-6733; http://www.mpja.com/ ) many power
supplies, 
NULL modem, Parallax BASIC stamp, misc kits, LED displays, LCD panels, ... 




Rubywand