Re: 8x ZipChip and DHR: Anyone else having problems?

[obsbedia2@aol.com (Obsbedia2)]

This is encouraging, gentlemen, but I tried the ZipChip on another Platinum IIe
and kept getting the same results.
Jay

<< Supertimer wrote:

> I repeat, something else in Jay's system must be tripping
> up the Zip because I used a Zip 8Mhz while I had my IIe
> and it worked great with mouse based double hires stuff.
> In fact, I got the Zip expressly for using GEOS at an
> acceptable speed.
>
> I also used it with Publish-It! and Multiscribe IIe.  GEOS,
> Publish-It!, and Multiscribe IIe are all mouse based DHR
> programs.  All worked with the Zip.

Just thought I'd second that and mention that my 8MHz ZipChip (model 8000)
works
just fine with my mouse and DHR mode as well.  I tried it with Publish It! 4
yesterday.  My IIe system looks like this:

- Rev D motherboard, ZipChip 8000 soldered in, 18 ga. power wires to all slots
- Bugg-Power power supply (also powers two 3.5" IDE hard drives mounted
internally)

- Aux slot:  1MB RamWorks II
- Slot 1:  Apple Workstation (LocalTalk) Card
- Slot 2:  Apple Super Serial Card II (modem)
- Slot 3:  PCPI 6MHz Appli-Card (Z80 CP/M)
- Slot 4:  Apple Mouse Card
- Slot 5:  Apple 3.5" SuperDrive Controller (two drives)
- Slot 6:  Apple Disk ][ Controller (two drives)
- Slot 7:  ///SHH Systeme MicroDrive IDE controller (connects to IDE drives)
- SMT No-Slot Clock

--
John E. Townsend
Sr. Software Engineer          "Machines should work;
LEXIS-NEXIS                     people should think."
Dayton, OH, USA                        -- IBM Polyanna Principle
utownje@lexis-nexis.com

 >>