Re: this laser 128 won't run adt.dmp

[supertimer@aol.com (Supertimer)]

Rubywand <rubywand@swbell.net> wrote:

>     A couple things to check with ADT are ...
>
>1. The PC part needs to run under DOS, not Win95 or a Win95 DOS window.
>
>2. The baud rate on the PC needs to be set to the same speed used on the Apple
>II (or Laser 128).
>
>
>     Even with speed being slightly off, transfers should work at 2400 baud.
If
>there is some way to set baud rate directly on the '128-- like a control
>panel-- you might try that.

The speed is not slightly off.  The Laser works fine with
14.4k modems, unlike flawed IIc units.  The problem is
the serial chip.  Lasers use a different one.  That's why
they do not work with ADT.  For the same reason IIGS
units won't work with ADT.

But like the IIGS, you could plug a Super Serial Card
and get a compatible serial port.

The Laser 128 has a single expansion slot on the left
side.