Re: TWGS oscillator

[cornelio@san.rr.com (L. Cornelio)]

In article <19991023024602.27733.00000170@ng-fo1.aol.com>,
supertimer@aol.com (Supertimer) wrote:

>cornelio@san.rr.com (L. Cornelio) wrote:
>
>>What corner does the little dot on the oscillator need to face? Top-right?
>>it is missing the oscillator, so if put one in wrong, could harm be done?
>>
>>I am told The board was working at 6Mhz. (w/ a 25?) but as I will need to
>>go buy one I wanted to try something higher.
>
>The TWGS uses a half size oscillator.  These are square metal
>boxes.  This is different from the full size oscillator of the Zip GS
>which is a rectangular metal box.
>
>As for the orientation of the oscillator, look at the oscillator's
>corners.  Three corners should be rounded and one corner
>should be sharp.  The sharp corner should be facing top-left.

This orientaion will work for the half-size on the TWGS, but cannot but
used for the rectangular Zip, correct?

----------------------------------------------------------------
Louis Cornelio   http://home.san.rr.com/cornelio
Apple II, my classroom and the Ramito Homepage