Re: Need help with CMS SCSI on IIgs

[dlw@starbase.neosoft.com (David Williams)]

I read the Hard Disk faq. The entry on the CMS jumpers didn't tell me much.
It said what the manual listed as the defaults and what someone else's
card was set at but didn't tell me what the jumpers were or how to decide
what to set mine at.  I'll try both settings in the faq but could still
use some more info.  Also, I saw in the faq where someone talks of CMS
versions of the GS/OS SCSI drivers and using those with 6.0.1.  Can anyone
send me a copy of the CMS util disk for GS/OS with those drivers?  I have
a ProDOS CMS util now but not the GS/OS stuff.

Thanks

-----
David Williams - Computer Packrat
dlw@trailingedge.com
http://www.trailingedge.com

In article <7sute3$2c9c@enews2.newsguy.com>,
David Chiu <none@nowhere.org> wrote:
>
>David Williams <dlw@starbase.neosoft.com> wrote in message
>07B65975C0B05EA7.D700D41252046C37.75EC5EC0028141BA@lp.airnews.net">news:07B65975C0B05EA7.D700D41252046C37.75EC5EC0028141BA@lp.airnews.net...
>
>> Thanks, I received the utils and downloaded them to my IIgs.  Now, does
>> anyone have the doc or can send me some notes on the jumper settings?
>> Currently when I run the utils they report "No Device" when I try testing
>> the drive or anything else.  Some notes on the card and how to set things
>> up would be great.
>
>The some documentation can be found in Apple 2 FAQ (Apple II FAQs Hard Disk
>& SCSI
>) recently posted.
>
>