Re: Apple IIe / ProDOS / Y2K?

[Liam Busey <liam1@ix.netcom.com>]

Supertimer wrote:
> 
> Liam Busey <liam1@ix.netcom.com> wrote:
> 
>>Sir Cain wrote:
>>>
>>> I've booted it in my II+ with 64K Ram as well.  I replaced the 6502
>>> with a 65802 a long time ago, it's a better replacement chip than >>> the 65C02.
>>
>> And nearly impossible to get these days too. I suppose you could use
>> 65816 in emulation mode with an adaptor board though.
> 
> It is important to point out that you can't plug a 65C816 into
> a IIe or II+ CPU socket, however.  Some of the data lines
> will get shorted to ground.  The 65C816 is not pin compatible
> with the 6502/65C02.

I realize this. That's why I said to use an adaptor board. ;)

Liam Busey