[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: New Ethernet card for the Apple II
- Subject: Re: New Ethernet card for the Apple II
- From: Babar de Saint Cyr <babardesaintcyr_NO@SPAM_wanadoo.fr>
- Date: 1999/09/08
- Newsgroups: comp.sys.apple2
- Organization: Wanadoo, l'internet avec France Telecom
- References: <37D4436C.E1F932A1@SPAM_wanadoo.fr> <19990908023148.12564.00003134@ng-fp1.aol.com>
> are you planning to mass produce these Ethernet
> cards for the Apple II?
Absolutely not.
I have no time, no possibility.
But to built it is simple:
- the ethernet module
- any test/prototype board you can find for Apple2
- two wellknow low cost TTL chips
Doable by any hobbist.
To reduce cost you can imaging an unique printed board
with all componants but:
- some componants are difficult to find (at least in France)
- stay with the problem to solder CS8900 chip
(maybe with a support?)
Babar
PS: If you have no news from me here, try Delphy web.