Re: Apple IIe help

["Kirk" <kirk@m33access.com>]

The ProDOS that I seem to have is version 1.x and when I use the menu to
identify drive 2 it will show a list of what's on the drive in "slot 6 drive
2" and I had check to see if there were errors on the disk and their isn't.
It's ok.
When I try typing CATALOG,D2 at the DOS prompt drive 2 comes on and then I
get an I/O error.
Once I get it to show what's on drive 2 how do I run it? Thanks for you
reply!

Kirk

Supertimer <supertimer@aol.com> wrote in message
19990901012905.25822.00002978@ng-fg1.aol.com">news:19990901012905.25822.00002978@ng-fg1.aol.com...
> Rubywand <rubywand@swbell.net> wrote:
>
> >Kirk writes ...
> >>
> >> I was given a complete Apple IIe system and it works! I do not have the
DOS
> >> manuals or anything, that's the downside!
> >> If I put the DOS disk in drive 1 and get to the ] prompt what is the
syntax
> >> to list and run files on floppy drive 2?
> > ....
> >
> >CATALOG,D2
>
> Don't forget that "the DOS" could be ProDOS.  If so, the
> CATALOG command would produce kind of a jumbled
> directory.
>
> If so, then the user is under ProDOS.  To make the
> ProDOS catalog look right, first type this command
> and press return:
>
> PR#3
>
> Then type the command you provided:
>
> CATALOG,D2