Re: Date & Time on Apple IIc+

["Gus Vilomar" <gvilomar@bellsouth.net>]

Thanks to "Supertimer" I found what I needed.  I'm posting his reply in
order to share the knowledge.  The actual software for the No Slot Clock can
be found at : ftp://tarnover.dyndns.org/cabi/Utilities/NSC.STUFF/

Gus
--------------------------------------------------

In a message dated 99-08-19 10:55:31 EDT, you write:

>Hi,
>
>I checked out http://www.jdr.com/  and found two Dallas Smartwatch:
>
>1. Dallas Smartwatch/ROM 64K/256K 28P
>2. Dallas Smartwatch/RAM 64K/256K
>
>I guess the difference would be that one is for RAM and the other is for
>ROM.  Which one should I buy?
>
>Gus

Hi Gus, grab the one for the ROM.  That one is designed to fit
under any 64k or 256k ROM/EPROM 28 pin chip.  What you
do is pry off a ROM in the IIc Plus, plug the Smartwatch into
the empty socket, then plug the ROM into the Smartwatch.

You'd then need to find the No Slot Clock software somewhere
from someone (best bet on csa2) since a patch must be
applied to ProDOS for it to recognize the SmartWatch.

--> The software can be found at :
Good luck!





Supertimer <supertimer@aol.com> wrote in message
19990818001452.21112.00000434@ng-xb1.aol.com">news:19990818001452.21112.00000434@ng-xb1.aol.com...
> "Gus Vilomar" <gvilomar@bellsouth.net> wrote:
>
> >Hi,
> >
> >Everytime I boot up, I need to set the date and time.  Is there a way to
set
> >the date and time one time and have the computer "remember" this
information
> >everytime it boots up?
>
> IIc Plus lacks a clock chip.  You can add one by installing the
> No-Slot clock/Dallas Smartwatch chip.