Re: Profile Cable

[dempson@actrix.gen.nz (David Empson)]

Paul Grammens <grammens@svn.net> wrote:

> Hi,
> I picked up a Profile today, but it's missing the cable. Anyone know
> what sort of pinout it uses?

Straight through 25-pin ribbon cable, with pin 7 cut out at both ends.

(Pin 7 is blocked on the controller card, to prevent accidentally
plugging an RS-232 cable into the card.  RS-232 requires pin 7 for the
signal ground line.)

-- 
David Empson
dempson@actrix.gen.nz
Snail mail: P.O. Box 27-103, Wellington, New Zealand