Re: Help With GS & CD-ROM, Please

[Rubywand <rubywand@swbell.net>]

Dave Lowry wrote:
> 
 ....

> Where might one find drivers?  The drive is a LaCie,
> formerly used with a Mac, so there was no GS driver supplied.
 ....

     You can find some CD drivers in the file Sys601DriversSHK.bin at ...

ftp://209.180.253.179/cabi/System/Sys601Components/ .

     Sys601DriversSHK.bin is a shrinkit file which should be uncompressed using
GS-ShrinkIt. (Actually, you can use 8-bit ShrinkIt, too. But, one of the
drivers-- the Pioneer 4200 CD-ROM driver-- will not be unshrinked.)
     


> Being a total Apple II newbie, slot 3 was just a guess.  What slot
> should it go in?  (There's a hard drive card in slot 7).


     If Slot 2 is open and you are using a telecom program which does not need
Slot 2 firmware (like Spectrum or ProTERM 3.1), then, Slot 2 is a good place
for your SCSI card.



Rubywand