[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: GS front panel and additional LEDs

Subject: Re: GS front panel and additional LEDs
From: mystix@direct.ca (Herbert Fung)
Date: 1999/06/02
Newsgroups: comp.sys.apple2
Organization: Society For Orange Pavement
References: <Fe253.1880$mN1.200783@newsgate.direct.ca> <37554479.4F9E45E6@swbell.net> <3755AF21.89E540F1@intergate.bc.ca>
Reply-to: mystix@NOSPAMdirect.ca

In <3755AF21.89E540F1@intergate.bc.ca>, W Stewart <waynes@intergate.bc.ca> writes:
>A good place to put one LED is right up against the green power
>light under the front sloping cover. I used a red LED and found
>that way it'd flash red when my ZipGS was working.
>Saves drilling one hole.

I thought about that and but there's only room for one LED and I'm planning on
adding two, so I figure why not drill two holes.

--
Herbert Fung
When replying please remove NOSPAM from the address
mystix@direct.ca
http://persweb.direct.ca/mystix/index.htm

Follow-Ups:
- Re: GS front panel and additional LEDs
  - From: Nick <spam@ix.netcom.com>

References:
- GS front panel and additional LEDs
  - From: mystix@direct.ca (Herbert Fung)
- Re: GS front panel and additional LEDs
  - From: Rubywand <rubywand@swbell.net>
- Re: GS front panel and additional LEDs
  - From: W Stewart <waynes@intergate.bc.ca>

Prev by Date: Re: GS front panel and additional LEDs
Next by Date: Re: The Apple IIGS ADB Keyboard Lives!
Previous by thread: Re: GS front panel and additional LEDs
Next by thread: Re: GS front panel and additional LEDs
Index(es):
- Date
- Thread