[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Solder pads

Subject: Re: Solder pads
From: W Stewart <waynes@intergate.bc.ca>
Date: 1999/05/30
Newsgroups: comp.sys.apple2
References: <3750E37F.91C02786@intergate.bc.ca> <375166ED.2878@sonic.net>

Maybe I should have said jumper pads. What it has is a number of
these that you solder across and some that you desolder or cut.
Similar to the ones you have on a IIe main logic board or on the
back of the IIe keyboard. This card has 4 solder across & 4
cutable pads.

Paul Grammens wrote:

> W Stewart wrote:
> >
> > On some clones of the Disk II card I notices some solder pads,
> > mostly on the back.  All of these cards nave a sticker ï¿½Q.C.OKï¿½
> > Anyone happen to know why theyï¿½re there?
> >
>
> Just a guess: they could be probe points for autotesting.
> -Paul

References:
- Solder pads
  - From: W Stewart <waynes@intergate.bc.ca>
- Re: Solder pads
  - From: Paul Grammens <pgrammen@sonic.net>

Prev by Date: Re: Apple III Operating System-SOS
Next by Date: Re: Wave file hidden in GS ROM v3!
Previous by thread: Re: Solder pads
Next by thread: Re: Solder pads
Index(es):
- Date
- Thread