Re: IIc ROM 3 and ADTPro?

[Eric Rucker <bhtooefr@gmail.com>]

On Feb 9, 7:19 pm, engrav <leng...@gmail.com> wrote:
> On Feb 9, 4:34 am, Eric Rucker <bhtoo...@gmail.com> wrote:
>
>
>
>
>
> > On Feb 8, 10:40 pm, engrav <leng...@gmail.com> wrote:
>
> > > as the aformentioned user
>
> > > it was whole and long and brutal but not sure it was "sordid" :)
>
> > > also what about revision 0 and 4? (apparently 255 and 5 have been
> > > tested)
>
> > > so has anyone been able to get //c revisions 0 3 or 4 to work with
> > > ADTPro? and if so, what were the steps?
>
> > I've gotten a revision 0 to work with ADTPro, using a null cable from
> > Atlaz, a 25 to 9-pin adapter, and a Prolific USB serial adapter on a
> > Windows machine. I did have to set the ImageWriter cable setting,
> > IIRC.
>
> > Bootstrapping was unreliable - it would occasionally drop characters.
> > Setting the pacing to the maximum took care of that, though, and
> > ADTPro itself works fine at 115200.
>
> interesting, would then seem rev0 is Ok
>
> but
> how exactly did you get from the //c to the Windows machine (am cable
> newbie and did not follow your comment)

I used a //c to 25-pin "modem" cable (it was actually a null modem
cable, sold by Atlaz - azalta on eBay), connected to a 25-pin to 9-pin
straight-through adapter, and then connected to a USB to serial
adapter.