Re: Mounting a 2gs hard drive on a MacSE/30 system7.5.3

[supertimer@aol.com (Supertimer)]

goble@kin.on.net (David. E. Goble) wrote:

>>Lastly, is the drive properly terminated?  Sometimes termination
>>problems causes SCSI voodoo.  Check SCSI ID settings and
>>hunt for any conflicts.
>
>The 2gs has an apple high speed SCSI card and the drive is set to
>SCSI#6 and has internal SCSI termination. Also the drive is the only
>SCSI device connected to the 2gs....so far :>

I think I might know why the drive is not responding to either
ADU v1.2 on the IIGS or SCSI Probe on your Mac.  The
resistor packs that are used for internal termination may have
failed.  If you have an external terminator, plug that into the
back of the drive on one of the SCSI connectors and see if
ADU v1.2 and SCSI Probe can do their things.  It is a long
shot, but it is possible.