[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Need little info on Apple LW II

Subject: Re: Need little info on Apple LW II
From: frederick.mckenzie-1@kmail.ksc.nasa.gov (Fred McKenzie)
Date: 1999/01/25
Distribution: inet
Newsgroups: comp.periphs.printers, comp.sys.apple2
Organization: NASA, Kennedy Space Center, Florida
References: <36A76A1F.F0264DDF@imag.fr> <36abea7f.9394338@nntp.cts.com>

In article <36abea7f.9394338@nntp.cts.com>, mwilson@cts.com wrote:
> I use one myself.  Wonderful printer.  Just wish I could figure out why it
> doesn't like 1 mb SIMMs.

Marc-

Are the SIMMs in Bank Zero?  Bank Zero is the bank farthest from the
connector panel.  If 1 mb SIMMs are used, they must be installed in groups
of 4, starting in Bank Zero.  If 256 Kb SIMMs are in Bank Zero, the
printer may think that all other SIMMs are also 256 Kb.

Fred

References:
- Need little info on Apple LW II
  - From: Guillaume ROBERT <Guillaume.Robert@imag.fr>
- Re: Need little info on Apple LW II
  - From: mwilson@cts.com (Marc Wilson)

Prev by Date: Apple II comp.sys.apple2 FAQs, Part 2/2
Next by Date: Re: Unknown error $1301
Previous by thread: Re: Need little info on Apple LW II
Next by thread: Re: Need little info on Apple LW II
Index(es):
- Date
- Thread