[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: putting a IIgs in a Mac II box
- Subject: Re: putting a IIgs in a Mac II box
- From: buggie@ben14.unm.edu (stephen e buggie)
- Date: 1999/01/09
- Newsgroups: comp.sys.apple2
- Organization: University of New Mexico, Albuquerque
- References: <01be3097$3a45cb00$adeb5cc3@drclarke>
I once swapped a Mac II cpu for 180 ram chips! That box is HUGE!
A more elegant casing with be to install a IIgs motherboard into a
mini-tower. I've not done it yet, but intend to.
The mini-tower comes with a 230 watt power supply built-in. For $14 plus
$3 shipping, I can supply a cable-only plug-together version of BUGG-POWER
for use in the mini-tower. One end connects to the standard IBM power
plugs, and the other end connects to the IIgs board.
The IIGS motherboard, located in the mini-tower on the floor, with need an
ADB keyboard m/f extension cable. CROW FRED of Scottsdale AZ sells these
ADB keyboard extension cables NEW for $2.50.
Ask others for info. re. mounting the drives. etc.,l bracing the
motherboard in its upright position, etc. Steve
**=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=**
** Stephen Buggie UNM-Gallup, 200 College Road, Gallup NM 87301 **
** buggie@unm.edu IIgs/IIc/IIe voice: (505) 863-2390 or 863-7504 **
** Apple ][ Forever ---- the "trailing edge"! **
**=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=**
Ron Clarke (user@clarke-ron.karoo.co.uk) wrote:
: I am thinking about putting a IIgs mother board in a Mac II box. Has anyone
: else done this? How do you get the Mac II power supplie to start up do you
: short out the white and yellow "signal leads?
: Ron clarke uk