On Dec 16, 5:28 pm, Steven Hirsch<snhir...@gmail.com> wrote:
On 12/15/2010 09:32 PM, James Littlejohn wrote:
I not sure if Mike did or not but, I had a full write up on A2Central
over the REV of boards and chips that were best for the acceleration.
I'm pleased to say that my IIc + is a Rev A with NCR ASIC. I replaced the
16Mhz. can oscillator with a 32Mhz. part and it seems to be running fine at
8Mhz. - with no other changes required. :-)
Thanks again for the nice writeup!
Steve
My IIc+ has the same ASIC. Sadly, my soldering skills are
nonexistent, so I will have to be content with 4 MHz... But it's good
to know that the upgrade *could* be done...