Re: Question:ZipGS/RAMfast SCSI/ROM 3 GS

[Wayne Stewart <waynes@intergate.bc.ca>]

LJSILICON wrote:

> Hardware people, here's the question. I have a ROM 3 machine and I tried to
> move my ZipGS (10mhz), my RAMfast SCSI card (ROM 3.01e) and my Sirius 8 meg RAM
> card to it. My hard drive boots fine on my Woz edition GS. My ROM 3 machine
> boots fine from 3.5 or 5.25" disks. The ROM 3 won't do squat with the hard
> drive. I have checked teh docs on the RAMfast and the ZipGS and I see no
> specific problems listed with the ROM 3 GS. Any ideas? (Yes, even you Nathan.
> And, I did check your FAQ).
>
> Thanks,
> Rudy (LJSilicon)

I have the same setup and no problems.Have you tried holding down the 0 key on
startup to get into the Ramfast utilities?
I seem to recall that when I changed from ROM 1 to Rom 3 the Ramfast deselected
a couple of partitions.

       Wayne