[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Commodore drives can be controlled on Apple II serial!
- Subject: Re: Commodore drives can be controlled on Apple II serial!
- From: dougkalley@aol.com (DougKalley)
- Date: 1998/03/21
- Newsgroups: comp.sys.apple2
- Organization: AOL http://www.aol.com
- References: <6evdsc$qeb@bgtnsc03.worldnet.att.net>
>Also, as someone indicated, the Commodore serial port wasn't RS-232.
>Implementing this on a dedicated RS-232 port wouldn't be feasible, but it
If my memory is correct the c= output is a cut down IEEE-488. The 232 comes out
of the user port which isn't true 232C. Would it be easier run it out of a
floppy i/o, the a2 to 1571 line would have to be changed I assume? If you have
to code a program to do it I think that route makes more sense.
dougk
dougk