[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Appleworks ASCII Question
On Sun, 30 Nov 97 19:39:40 GMT, seiler@ma.ultranet.com (Scott Eiler)
wrote:
>But my problem is this:
>
>I have an Apple IIe with an I/O card (the same card my printer cable plugs
>into), a 25-pin Null Modem cable, and Comm.System on Chuck Orem's Apple II
>Modem Starter Disk. I'm trying to import into Windows 95 using Hyperterm
>on my COM2 port. Both ends support Xmodem with CRC, but no data gets
>across.
Is your Apple //e's card a SERIAL card (not parallel)?
If it's an Apple Super Serial Card, try taking the chip with a
triangle on it off, and putting it back on, only upside-down. Try
slower baud rates.
--
_ />____________________ +==Apple // Forever==+
|| | |/ \| | |M#M#M#||____________________---__ +-37th Wisest Wizard-+
|| | |`-.| | |#M#M#M||____________________--- +- Edhel Iaur, Esq. -+
||/ \|\_/|/ \| \> http://members.aol.com/owsw/1WSW.Home.Page.html
http://www.grin.net/~cturley/USA2WUG/FOUNDING.MEMBERS/HOME.PAGES/EDHEL
***For my correct email address, delete all the capital letters***