[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Apple //c--Uh-oh!
Earlier today, I (dalloff@freenet.columbus.oh.us) wrote:
: Uh-oh!
: I have a "ROM $FF" //c. And it has been acting a little flaky.
Well, thanks to Steve Buggie, it is now a ROM $00 //c, and it isn't flaky
at all.
: The net.wisdom was that I had one or more bad RAM chips. Okay.
: So, over the weekend, I carefully desoldered all eight of the main-bank
: RAM chips, installed sockets, and replaced the RAM (well, I had to...I
: damaged or destroyed most of the old chips getting them out...)
: Trouble is, in extracting one of the RAMs, I managed to also destroy the
: small yellow part, presumably a capacitor or diode, identified as "C8" on
: the board. 8-(
: Question: What is this thing? What value is it, so that I can replace it?
Answer: Several people have identified it as a bypass cap. Thanks! I
have found that the system does work without it, though I should replace it.
: As I am a brave person, I powered up the machine anyway. No *BEEP*, but I
: got a screen full of hi-res graphics that looks like a bunch of green and
: purple "A"'s. This is worse than the machine was before I started surgery.
Well, my upgrade ROM arrived today. So I wanted to hurry up and install
it. So I did, and I powered up the machine, and it worked fine. So I put
it back together, and it quite working. I took it apart and it worked fine.
Remember that I installed sockets for the RAM? That raised one of the
chips up just enough that the disk drive chassis shorted across the legs
once the screws were installed. A well-placed chunk of electrical tape
solved the problem.
Thanks for all the advice!
--Dave Althoff, ][.
--
/-\ _ _ *** Thanks for a great season!!! ***
/XXX\ /X\ /X\_ _ /X/|_ _ _ _____
/XXXXX\ /XXX\ _/XXXX\_ /X\ <#&/XXX\ /X\ /X\ /XXXXX
_/XXXXXXX\__/XXXXX\/XXXXXXXX\_/XXX\_o==oXXXX\__/XXX\_/XXX\_/\_/XXXXXX