[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Apple 3.5" card cable repair
- Subject: Re: Apple 3.5" card cable repair
- From: A2Aviator <a2aviator@gmail.com>
- Date: Wed, 1 Sep 2010 20:21:39 -0700 (PDT)
- Complaints-to: groups-abuse@google.com
- Injection-info: k17g2000prf.googlegroups.com; posting-host=68.111.242.13; posting-account=gdx88woAAACGV1Uy7Bxglx7ddYb2dVEd
- Newsgroups: comp.sys.apple2
- Organization: http://groups.google.com
- References: <i5n0nv$duc$1@news.eternal-september.org>
- User-agent: G2/1.0
- Xref: g2news1.google.com comp.sys.apple2:17932
You can also jam a "rod" into the connector, heat that up and run
solder down it, and then solder to that- or dig some plastic away from
the side... A piece of gold pin from a 20 pin Disk II card would do
it. Remove one of the ground pins from the connector and that would be
plenty long to shove in there.
Sacrifice a 19 pin Disk II card - use the whole cable assembly off
it.
I'd have it soldered back on if it were in front of me.