[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: GSII Power Supply
- Subject: Re: GSII Power Supply
- From: "Tom Zuchowski" <tzuchow@ibm.net>
- Date: 1997/09/02
- Newsgroups: comp.sys.apple2
- References: <01bcb700$eb0b4a80$ac5d2fd1@pentium>
The number one failure in switching power supplies is the electrolytic
capacitors. More often than not, they can be repaired just by replacing all
of the electrolytics.
TomZ
KP <kporter@*netrover.com> wrote in article
<01bcb700$eb0b4a80$ac5d2fd1@pentium>...
> I believe that the power supply on my GSII is going. It is only putting
out
> 3.5 and
> about 2 volts. If I plug any disk drives in it won't boot. If I
disconnect
> everything it
> will boot to "Check startup devices".
>
> Other than checking solder traces, anyone know if there are any
components
> that
> I could easily check? I am not an electronics wiz.
>
> Thanks
>