Laser disk drives

[sbeattie@sparc5.augustana.edu]

I have two Laser 3.5" drives.  However, they do not have the port on
the back for daisy-chaining.  Why do some Laser drives have the port
and others don't?  There is a plastic punch-out on the back where the
SB19 port normally would be.


I was also unaware that there are Laser 5.25" drives that have the
DIsk II style 20-pin connectors.  I assume these were designed to
be used with the II/II+/IIe rather than with the Laser.  I have 2 of
these also.  So, it looks like I'm stuck with 4 drives that must be
at the end of the disk drive chain...:<

Info on these drives would be appreciated.

Shawn